Payment & Shipping Terms:
|Outlet Moisture:||0.1-0.8%||Motor Power:||3kw*2|
rotary sand dryer,
sand rotary dryer
5-8t/h Three cylinder rotary dryer for drying silica sand with snall space
Three cylinder rotary dryer is widely used in mineral processing, building materials, metallurgy, and chemical industry, drying a certain humidity or particle size of materials. The dryer has strong adaptability to materials, can dry all kinds of materials, and the operation is simple and reliable.
The raw material sand will be fed into the hopper through belt conveyor or bucket elevator. Sand rotary dryer is a slightly inclined rotating cylinder with horizontal lines. Raw material sand will be fed from the higher end, while hot air enters from low-end, forming counter-current contact with the drying raw material sand. As the rotation of the cylinder, raw materials run to the end of the sand dryer under gravity. Wet raw material, in the course of the cylinder moving forward, directly or indirectly get heat from hot air which temperature is more than 500°C, for drying wet material, and then discharged through the screw conveyor or belt conveyor installed at the end of discharging part. Sand dryer is equipped with raising plate on the inside cylinder wall, and the raising plate plays the role of raising and falling down materials, increasing the contact surface between material and air flow, to improve the drying efficiency.
1. Powder and particle: Sands, limestone, stones, clay, mineral filter cake, coal, iron sulphate, filter cakes, fly ash, gypsum etc.
2. Damp and sticky material: Coal slime, sewage sludge, bentonite, Kaolin etc.
3. Corrosive material: Distillers ‘grains, Fertilizer, animal dung, slag etc.
4. Biomass material: Sawdust, wood chips etc.
|Diameter of drum||2140mm|
|Speed of drum rotation||4-10 r/min|
|Moisture of end products||0.1%-0.8%|
|Max. temperature inside||700-750℃|
|Hot-blast Stove dimensions||2326×1726×2400mm|
|Quicksand tube||φ273×1500 mm|
|Coal consumption||7-10 kg/ per ton sand|
Packing and shipping
* Free for design.
* Sample testing support.
* View our Factory.
* Training how to install the machine, training how to use the machine.
* Engineers available to service machinery overseas.
Contact Person: admin