Product Details:
Payment & Shipping Terms:
|
| Capacity: | 10-13t/h | Warranty:: | 12months |
|---|---|---|---|
| Inlet Moisture: | 0-15% | Outlet Moisture: | 0.1-0.5% |
| Motor Power: | 5.5kw*2 | Brand: | Yuhong |
| Max Temperature Inside: | 750℃ | Color: | As Requirement |
| High Light: | rotary sand dryer,sand rotary dryer |
||
10-13t/h YHSS6210 sand drying machine factory pricewith good quality and after-sale
Introduction:
triple-pass drying system is the third generation triple-pass dryer developed from S62 series drying machine. It is characterized by small occupation area,large handing capacity and high thermal efficiency. After continuous improvement, TDLT drying system has reached to international advanced level. It can be used to efficiently deal with materials with low viscosity and high moisture content, particles materials and other special materials such as sand, mineral ore, mineral powder, pomace and medicine dregs.
Heating Fuel: Coal, Gas, Oil, Biomass fuels, Wood,etc.
Technical Parameter
| Parameters | YHSS6210 |
| Drying capacity | 10-13t/h |
| Diameter of drum | 2000mm |
| Length | 4500mm |
| Motor power | 5.5kwx2 |
| Reducer model | XWD-5 |
| Speed of drum rotation | 4-10 r/min |
| Max moisture | 15% |
| Moisture of end products | 0.1%-0.8% |
| Max. temperature inside | 700-750℃ |
| Outlet temperature | 30-60℃ |
| Hot-blast Stove dimensions | 2576×2026×2650mm |
| Furnace door | 350×450mm |
| Quicksand tube | φ325×1690 mm |
| Coal consumption | 7-10 kg/ per ton sand |
Detialed Image
1.The cyclinder of the dryer:
Material: Use high quality carbon steel or customer specified steel
Internal structure: designed with internal blades and other devices
Seamless welding
Main feature: high quality steel plate, customer can specify steel plate thickness and steel plate material
Parts:
Material: high quality steel plate, customer can specify steel plate thickness and steel plate material
Detailed Image
Rotary dryer consists of the cylinder, before and after the roller circle, a large gear, gear roll, drag roller, a small gear, a feeding device, lifting plate, reducer, motor, feeding devices and other components.
Advantages:
1.Compared to single cylinder dryer the machine length shortens 60%, in favour of process arrangement. Reduces workshop covered area, reduced the project investment by 40%. Occupation area: about 20m 2. Adopted lates technology, cylinder self insulation, thermal efficiency is as high as 80% (single cylinder dryer is only 35 percent), thermal efficiency than single cylinder drying saves coal 68%, yields 100%.
3. Heat-resisting wear-resisting alloy steel plate, four times than ordinary steel wear-resisting. Long service life and easy maintenance. 4. High thermal efficiency, outside shell temperature below 60 °C (single cylinder dryer outside shell temperature as high as 150°C), output of low temperature, discharging temperature below 60 °C. 5. Output of low temperature, be helpful for dust collector to use a long time, can be directly supporting air tank pulse bag filter.
6. Construction investment reduces 50%, power consumption reduces 60%. 7. Adopts roller rotation, no need reducer. 8. Hot air stove can supporting fluidezed bed, spray stove, hands burned furnace, also used in fuel and gas type, can bake the below 20 mm pieces of materials, aggregates, powder material. 9. After drying the moisture content of materials at 0.5% and below, which can meet different industries requirement.
Our Service
Pre-sale
1. According to your needs, select right model for you.
2. According to your special requirements, design customized solution and manufacture customized products for you.
3. Welcome your visit.
Sale
1. Sign contract, pay deposit, we arrange production.
2. Product acceptance.
3. Help you formulate construction scheme.
After-sale
1. Assign engineer service for you on-site freely.
2. Install and adjust device, train how to operate.
3. After installation, leaving 1-2 technical staff to help you on-site production, until achieve customer satisfaction.
Contact Person: admin
