Product Details:
Payment & Shipping Terms:
|
| Capacity: | 6-8t/h | Input Moisture: | 10-40% |
|---|---|---|---|
| Output Moisture: | 1-5% | Max Feed-in Temperature: | 800℃ |
| Warranty: | 12months | Color: | As Requirement |
| High Light: | rotary drum dryer machine,rotary drying equipment |
||
ISO9001 & CE Approved Rotary Dryer machine For Drying Palm Kernel Shell
Product Application
Building materials products include construction materials and products, non-metallic minerals and products, and inorganic non-metallic new materials. They are widely used in fields such as construction, military industry, environmental protection, high-tech industries, and people's lives.
The quality of building materials continues to increase, energy and raw material consumption are declining year by year, new types of new building materials continue to emerge, and building materials are constantly upgraded. As a result, the requirements for the processing technology of building materials have been continuously improved. For example, the control requirements for impurities and moisture content of raw materials have been continuously improved. Only in this way can products with guaranteed quality be produced.
Heat Source
The heat source of the dryer is coal, electricity, gas, etc.Material hot atmosphere flow during drying and radiant, hot air drying cylinder is the heat flow from the tail, to move forward with a good contact with the material, through the heat conduction, convection and radiation heat transfer make full use of;Pass heat directly to the material, make the material moisture to evaporate in the cylinder body are constantly being, into the mouth of the wind device take out a large number of moisture, wet, prevent secondary pollution caused by the dust outside;Through internal spiral stirring, scavenging, copying plate, press the material movement, complete the drying process;Reverse flow dehumidification to avoid reducing repeat drying procedures.
Work Principle
The wet material is sent to the hopper by the belt conveyor or the bucket elevator, and then through the feed pipe to the feeding end through the feeder of the hopper. The slope of the feed pipe is greater than the natural inclination of the material so that the material can flow smoothly into the dryer. The dryer cylinder is a rotating cylinder slightly inclined to the horizontal line. The material is added from the higher end, and the heat carrier enters from the low end, and is in countercurrent contact with the material. There is also a heat carrier and the material flow into the barrel together. As the cylinder's rotating material is moved by gravity to the bottom end. During the forward movement of the wet material in the cylinder body, the heating of the heating medium is obtained directly or indirectly, so that the wet material can be dried, and then sent out at the discharge end via a belt conveyor or screw conveyor. A copy board is installed on the inner wall of the barrel, and its function is to copy the materials and scatter them, so that the contact surface of the materials and the air flow is increased, so as to increase the drying rate and promote the advancement of the materials. Heat carrier is generally divided into hot air, flue gas and so on. After the heat carrier passes through the dryer, a cyclone dust collector is generally required to trap the material contained in the gas. If it is necessary to further reduce the dust content of the tail gas, it should also be discharged after bag filter or wet filter
Flowchart of drying process
Technical Parameters
| Diameter | Length | speed | Installation obliquity | Drying temperature | Capacity | Motor | Weight |
| (m) | (m) | (r/min) | (%) | (°c) | (t/h) | (kw) | (ton) |
| 0.8 | 8 | 3-6 | 3-5% | ≥800 | 0.6-0.8 | 3 | 3 |
| 1 | 10 | 3-6 | 3-5% | ≥800 | 1-1.5 | 4 | 7 |
| 1.2 | 10 | 3-6 | 3-5% | ≥800 | 1.8-2 | 7.5 | 14 |
| 1.2 | 12 | 3-6 | 3-5% | ≥800 | 2-3 | 11 | 15 |
| 1.5 | 15 | 3-6 | 3-5% | ≥800 | 3-3.5 | 15 | 17.8 |
Detailed image and spare parts image
Our service
Pre-Sales Service
* Inquiry and consulting support.
* Sample testing support.
* View our Factory.
After -Sales Service
Semi-Automatic PET Bottle Blowing Machine Bottle Making Machine Bottle Moulding Machine
PET Bottle Making Machine is suitable for producing PET plastic containers and bottles in all shapes.
Contact Person: admin
