Product Details:
Payment & Shipping Terms:
|
| Product Name: | Yuhong Washing Tower | Condition: | New |
|---|---|---|---|
| Warranty: | 1 Year | Key Word: | Washing Tower |
| Color: | As Requirement | Application: | Industrial Dust Removal |
| High Light: | industrial dust collector,pulse bag dust collector |
||
1200mm diameter good quality washing tower used for dust collecting industry
Production introduction
1. Before use, check the intact valves of all systems of the equipment, the correct selection and proportion of absorbent agents, and timely replenishment of absorbent solutions when they fail to meet the specified requirements. When starting, the pump should be turned on for 3-5 minutes before the fan is turned on. When closing this purification system, the fan should be shut down for 2-3 minutes before the pump can be shut down. Otherwise, the motor will be burned and the packing will be blocked, which will affect the purification effect.
2. The wiring of fans and pumps should not move randomly. They should be turned correctly and not reversed. Otherwise, they will damage the motor and cause accidents.
3. After the operation and delivery of the equipment, the user unit should send a special person to keep and use it. Regular inspection shows that the equipment is abnormal sound or leaking water. It should be shut down and repaired before it can be used.
4. The equipment is installed outdoors. The motor of the pump fan should be made of rain-proof cover so as not to damp the motor. Whether the equipment is installed indoors or outdoors, if fiberglass reinforced plastics is used, protective cover must be installed to prevent screw loosening, bearing damage or suction of debris, explosion when breaking impeller and injuring personnel, resulting in accidents.
5. Replacement and allocation of purifying solution: The formulation ratio of purifying absorbent solution in our factory is determined by the gas source and concentration of user units. It will be provided to user managers after the equipment is tested and accepted normally.
Technical parameter
| No. | Dia.(mm) | Height(mm) | Power(KW) | Air volume(h/m3) | spray | Thickness(mm) |
| 1 | 1000mm | 2500 | 0.75 | 5000 | 1 | 6 |
| 2 | 1200mm | 3700 | 1.5 | 8000 | 2 | 8 |
| 3 | 1500mm | 4000 | 2.2 | 12000 | 2 | 8 |
| 4 | 2000mm | 5500 | 3 | 20000 | 3 | 10 |
| 5 | 2500mm | 5500 | 3 | 30000 | 3 | 10 |
Working Principle:
1. After the particulate contaminants in the gas stream contacts with the washing liquid, the droplet or liquid film diffuses or humidifies the particles in the gas, making particles separate by gravity and inertia. Gaseous pollutants are transported by the mass transfer of flocculating molecules and chemical reactions, and chemical substances are added to the washing liquid to control the gas odorous substances by absorption.
2. Exhaust gas is absorbed and neutralized via a packed scrubber and scrubbing liquid (using filler to increase contact surface area), Eliminate harmful particulate matter from exhaust gas. The exhaust gas is treated by a gas-liquid reverse absorption method through a packed washing tower, and small water droplets are generated by the mist sprinkling. The exhaust gas reaches the gas-liquid contact by the reverse flow of the bottom of the tower.
Feature:
1. The filler has a large effective surface area, high mass transfer efficiency, strong contact removal effect, uniform structure, large gap, and reduced pressure to save motor power.
2. price is low.
3. The space requirement is small, the body mass is small, the weight of the entire washing tower is reduced, and the space body structure is sturdy and durable, and has a high stacking height without special brackets.
4. Remove 0.3-1um granule, 99% rate for 1-2um size granule.
Contact Person: admin
