Product Details:
Payment & Shipping Terms:
|
Product Name: | Scrubber | Condition: | New |
---|---|---|---|
Warranty: | One Year | Key Word: | Washing Tower |
Color: | Up To You | Application: | Industrial Dust Removal |
High Light: | dust collection equipment,pulse bag dust collector |
High efficiency spray tower washing tower scrubber with low price
Production introduction
1. Before use, check the intact valves of all systems of the equipment, the correct selection and proportion of absorbent agents, and timely replenishment of absorbent solutions when they fail to meet the specified requirements. When starting, the pump should be turned on for 3-5 minutes before the fan is turned on. When closing this purification system, the fan should be shut down for 2-3 minutes before the pump can be shut down. Otherwise, the motor will be burned and the packing will be blocked, which will affect the purification effect.
2. The wiring of fans and pumps should not move randomly. They should be turned correctly and not reversed. Otherwise, they will damage the motor and cause accidents.
3. After the operation and delivery of the equipment, the user unit should send a special person to keep and use it. Regular inspection shows that the equipment is abnormal sound or leaking water. It should be shut down and repaired before it can be used.
4. The equipment is installed outdoors. The motor of the pump fan should be made of rain-proof cover so as not to damp the motor. Whether the equipment is installed indoors or outdoors, if fiberglass reinforced plastics is used, protective cover must be installed to prevent screw loosening, bearing damage or suction of debris, explosion when breaking impeller and injuring personnel, resulting in accidents.
5. Replacement and allocation of purifying solution: The formulation ratio of purifying absorbent solution in our factory is determined by the gas source and concentration of user units. It will be provided to user managers after the equipment is tested and accepted normally.
Technical parameter
No. | Dia.(mm) | Height(mm) | Power(KW) | Air volume(h/m3) | spray | Thickness(mm) |
1 | 1000mm | 2500 | 0.75 | 5000 | 1 | 6 |
2 | 1200mm | 3700 | 1.5 | 8000 | 2 | 8 |
3 | 1500mm | 4000 | 2.2 | 12000 | 2 | 8 |
4 | 2000mm | 5500 | 3 | 20000 | 3 | 10 |
5 | 2500mm | 5500 | 3 | 30000 | 3 | 10 |
Feature:
1. saving energy consumption
Without packing and gas-liquid exchange tray, the system resistance is small and the fan power is reduced.
2. long switching time
Because of the atomization up-spraying in the tower, the exchange time between liquid and gas exchange is doubled.
3. no leakage hidden danger
The tower body is a cylindrical tower winded with polyphenylene material. It has no segmented connecting flange and no leakage hidden danger.
Contact Person: admin