Product Details:
Payment & Shipping Terms:
|
| Capacity: | 1.5-12t/h | Mesh: | 325-2500 |
|---|---|---|---|
| Max Feeding Size: | 10mm | Condition: | New |
| Warranty: | 1 Year | Application: | Mining,Stone Powder Grinding |
| High Light: | grinding mill equipment,ultra fine grinding mill |
||
1.5-12t / h high efficiency ultrafine powder mill for mining industry
Processed Materials:Kaolin, limestone, calcite, talcum, barite, pottery clay, dolomite, bentonite, mica, illite,vermiculite,sepiolite, diatomite, graphite, alunite, floatstone,etc
Applications:Chemical Industry, paint, cosmetics, medicine, food additive,etc.
Product Introduction
Nowadays, HGM micro-powder mill is widely used in many industries, like soda, toothpaste, cosmetics, rubber, paint, paper, PVC, glass, etc. HGM Micro-Powder Mill is specially designed for micro-powder making. It can be used for non-metallic ores like limestone, calcite, kaolin, talc, illite, etc.
Applicable materials:
HGM Micro Powder Grinding Mill machine is mainly applied to non-inflammable, non-explosive and brittle materials with Mohs hardness under six. Such as calcite, chalk, limestone, dolomite, kaolin, gypsum, etc, totally more than 100 kinds of materials. Product fineness can be controlled between 325~2500 mesh.
Technical Data
| Model | Average Diameter | No. of Ring | No. of Roller | Speed of Main Shaft | Max Feeding Size | Size of Finished Products | Capacity | Dimensions | Whole Machine Power | |
| (L×W×H) | ||||||||||
| (mm) | (r.p.min) | (mm) | um | mesh | (t/h) | (m) | (kw) | |||
| HGM80 | 800 | 3 | 21 | 230-240 | 10 | 5-47 | 325-2500 | 0.5-4.5 | 13.9*4*6.2 | 145-165 |
| HGM90 | 930 | 3-4 | 24-27 | 200-220 | 10 | 5-47 | 325-2500 | 0.6-6.5 | 14.7*4.8*7.2 | 185-204 |
| HGM100 | 1035 | 3 | 27 | 180-200 | 10 | 5-47 | 325-2500 | 0.7-7 | 18*4.6*8.6 | 263-290 |
| HGM100A | 1035 | 4 | 34-36 | 180-200 | 10 | 5-47 | 325-2500 | 1-8.5 | 18*4.6*8.6 | 263-290 |
| HGM1253-8 | 1300 | 4 | 40-44 | 135-155 | 10 | 5-47 | 325-2500 | 1.5-12 | 14*9*10.25 | 380-430 |
Features
1. Efficient
Compared with jet mill, mixing grinder and ball mill of same finished product size and motor power, HGM Micro-Powder Mill has double capacity and saves 30% energy.
2. Long Life of Spare Parts
Forged by special material, the ring and roller can be used for about one year while grinding calcium carbonate.
3. High fineness and flexible adjustment
The product size can be adjusted between 325 mesh to 2500 mesh (47-5micron).
4. Environmentally friendly
The application of pulse dust collector and muffler greatly reduce dust pollution and noise.
Advantage:
1. Newly designed grinding curves enhanced the grinding efficiency and the capacity increased by 40%. The yield is twice as large as ball mill and energy efficiency is up by 30%.
2. Adopt cage classifier, the powder-selecting efficiency is more higher. The product fineness
can be adjusted between 325-2500 meshes.
3. HGM medium speed mill adopts gas flow, open circuit fan system, higher capacity. Comparing with ordinary mill, the closed-circuit system has more ventilation, which leads a higher yield
4. More grinding rings, easier to adjust for higher fineness. 7/9pcs in each layer of the disk, 21/27 totally. The final fineness can reach D9≤75 microns one-time.
5. Adopt pulse dust collector, more efficient and environmental protection.
6. Adopt low lost and high quality of wear-resisting material on the spare parts, over one year lift time mostly.
Contact Person: admin
