|
Product Details:
Payment & Shipping Terms:
|
Name: | Raymond Roller Mill | Condition: | New |
---|---|---|---|
Motor Type: | AC Motor | After-sales Service Provided: | Engineers Available To Service Machinery Overseas, Field Installation, Commissioning And Training, Online Support, Video Technical Support |
Usage: | Barite, Calcite, Potash Feldspar | Feature: | Large Passing Ratio |
High Light: | 20mm Raymond Roller Mill,4 Ton Raymond Roller Mill,20mm raymond vertical mill |
Description
Raymond mills are widely used for barite, calcite, potash feldspar, talc, marble, limestone, dolomite, fluorite, lime, activated clay, activated carbon, bentonite, kaolin, cement, phosphate rock, gypsum, glass , Insulation materials and other non-flammable and explosive minerals, chemical industry, construction and other industries with Mohs hardness not greater than 7 and humidity below 6%. , Some materials can reach up to 600 meshes.
Advantages
1. The Raymond Mill adopts a three-dimensional structure, a small area, and a strong complete set. It forms an independent production system from block material to finished powder.
2. The fineness of the finished powder is uniform, and the sieving rate is 99%, which is difficult for other milling equipment.
3. The transmission device of the machine adopts a closed gear box and belt wheel, with stable transmission and reliable operation.
4. The important parts of the Raymond Mill are made of high-quality steel, and the wear parts are made of high-performance wear-resistant materials, the whole machine has high wear resistance and reliable operation.
5. The electrical system adopts centralized control, the grinding workshop can basically realize unmanned operation, and the maintenance is convenient.
1. Classifier: Size of final product can be 0.613mm (30mesh) –0.033mm (425mesh). Some can reach the fineness of 0.013mm (1000 mesh).
2. Grinding device:The multi-class seals are adopted to keep the grinding equipment tightly closed.
3. Spacer protective measures: Mainframe is under protection, easy to be replaced, maintenance cost is reduced.
4. Spring strengthens grinding force: Compared with other mills, its capacity increases by 10%-20% under the same powder condition. compression force of rollers to material improve 800-1200kgf under the force of high-pressure spring.
5. Blower: Enhancing fan configuration and frequency conversion speed can be based on features of different materials, fineness, production requirements so as to efficiently adjust the air volum, achieve the best running state and reduce the energy consumption.
6. Pulse dust collector: Dust removal effect reaches the national powder emission standards; According to customers' actual demand, pulse bag filter can also be used, thus achieving rapidly automatic dust removal, and dust removal efficiency is higher.
Application
Our YGM High Pressure Overhang Roll Mill is applicable to process high-level milling of more than 280 kinds of materials. Such as: barite, slag, calcite, chalk, limestone, dolomite, kaolin, mica, magnetite, vermiculite, meerschaum, gypsum, graphite, fluorite, phosphate ore, potassium ore pumice, etc. With the moth`s hardness less than 9.3 and moisture less than 8%. The size of the finished products can be adjusted from 80 to 425.
Technical parameters
Model |
Piece of roller |
Size of the roller (mm) |
Size of the ring (mm) |
Feed size(mm) |
Fineness of powder (mm) |
Capacity (t/h) |
Motor power (kW) |
Weight (without motor)(t) |
YGM85 |
3 |
270×150 |
830×150 |
≤20 |
0.033-0.613 |
1.2-4 |
22 |
8 |
YGM90 |
3 |
300×160 |
910×160 |
≤25 |
0.033-0.613 |
2.1-5.6 |
30 |
11 |
YGM95 |
4 |
310×170 |
950×170 |
≤25 |
0.033-0.613 |
2.1-5.6 |
37 |
14 |
YGM130 |
5 |
410×210 |
1280×210 |
≤30 |
0.033-0.613 |
2.5-9.5 |
75 |
24 |
Customized service
YGM High Pressure Overhang Roll Mill mainly consist of main unit, classifier, dust cleaner, powder collector, blower, muffler, hammer crusher (can be replaced by jaw crusher), bucket elevator, sound-proof room, storage hopper, vibrating feeder and so on.
1. Big lump materials are crushed into required size by crusher machine.
2. The out-let materials are elevated to buffering hopper through elevator.
3. After that the materials are fed into the mill to be ground by ring and rollers.
4. The ground powders move up with the air flow to pass the separator and be collected as the finished product.
5. Those powders failed to pass the separator will fall down and be ground again.
6. Air flow passing through separator will go to the air blower for recycling.
Working principle
Firstly, raw material is crushed by jaw crusher to the required size, which is lifted up to the hopper.
Secondly, the raw material goes into the grinding chamber through the electro-magnetic vibrating feeder at an even rate.
Thirdly, the raw material lifted by the shovel is ground into powder between the ring and roller.
Fourthly, the powder is blown up to the cyclone collector through the classifier, which will be collected through the discharging valve. The unneeded powder, which cannot go through the classifier, will be reground into the needed powder.
FAQ
Q1: Why choose YuHong machinery?
A1: 1. Up-to-date design, CAD calculation and simulation;
2. ISO,BV,SGS,CE quapty control manufacturing;
3. Over 30 years experience, export to over 50 countries;
4. Highest standard to suit operators' use;
5. World class quality at affordable price.
Remarks: The price will depend on different models. Reply message ,you will get 5% discount price.
Q2: What are the requirements for Raymond Mill material?
A2: Our Yuhong has a high standard on choosing material of Raymond Mill.
1.Using very high grade steel plate (i.e. Q235, Q345) on structuring part;
2. Using wear-resistant steel (i.e. ZG35, ZGMn13, 65Mn, 35CrMo, ZG60Si2CrA) on quick-wear parts;
3. The motor, reducer, bearing, belt, bolts are Chinese top 5 brands;
4. Metallurgy performance must be considered during designing, cutting, bending, fitting&welding.
Q3: What information do we need to provide you the reasonable model and best quotation?
A3: 1. What is the raw material?
2.Raw material maximum feeding size (mm or mesh)?
3. Final products size (mm or mesh) and usage?
4. What is the capacity per hour?
Company and factory
HENAN YUHONG HEAVY MACHINERY CO., LTD.
Henan Yuhong Heavy Machinery Co.,LTD is a joint-stock mining machinery manufacturing enterprise integrated in scientific research,prodcution and marketing.our main products include five series ,they are the Crushing equipment ,Beneficiation equipment,Grinding Powder equipment ,Drying equipment ,Kilning equipment.YUHONG GROUP set off from "the customer for this " angle ,put self's whole heart to be that the customer provides the valuable service pattern,the effort using up 100% satisfies different customer product need.
Contact Person: Ronbin Niu
Tel: +8615713893960