Municipal Sewage Treatment New design belt vacuum filter press

Product introduction

Belt filter press is composed of a gravity dewatering section, a pressing section (several squeeze rollers), and upper and lower filter belts. This is a high-efficiency device, which can make full use of the material's gravity and the effect of repeated pressing rollers to form a shearing effect on the material, thereby achieving solid-liquid separation.

Product Principle

The material and flocculant are fully mixed and reacted, then flow into the gravity pre-dehydration section, and the material is filtered under the action of gravity. The material advances with the upper and lower filter belts. First enter the "wedge" press section, the material is dewatered under slight pressure; second, enter the "S" press area, the material is sandwiched between the upper and lower filter belts, and repeatedly pressed by several different caliber rollers to dewater the material. The dehydrated filter cake is removed with a scraper, the upper and lower filter cloths are moved forward and cleaned, and then re-entered the next work cycle.

Features

1. The main body is made of stainless steel, which has high strength.

2. The equipment runs fully automatically for 24 hours

3. Large material handling capacity and low power consumption

4. Set air chamber type automatic deviation correction device to ensure stable operation of filter cloth.

5,  strong product capacity, good washing effect, flexible operation, less water in the cake, low maintenance costs

6. The safety system monitors the entire working environment and automatically stops the device to meet the needs of operational safety.

Technical parameter